Odyssey-electronics DVR Bedienungsanleitung PDF herunterladen

Remote Eyes

Setup Instructions

Congratulations on purchasing your new Remote Eyes

Digital Video Recorder.

This document will assist you in setting up your unit. Inside the shipping box you should find:

• Remote Eyes system unit

• Front panel security key

• Keyboard

• Power cord

• Mouse

• Handles and screws

• Rails and screws (for mounting in a rack)

After removing the system unit from the box, connect the keyboard and mouse using the color-coded

connectors on the unit’s back panel (see picture of back panel for your model, below). Connect the power

cord to the unit and then to a 110V AC outlet.

You will need to provide at least a 17” computer monitor for use with this unit. Connect your monitor

cable to the color-coded connector on the rear of the unit. NOTE: 16 channel servers require a

resolution of at least 1280x1024; monitor resolution of 1600x1200 is recommended for optimal

viewing of a 16 camera display.

The camera connectors are located on the back panel of the unit. Depending on your unit’s configuration,

you will have 4, 8, 12, or 16 camera connectors. You will notice a picture of the connections on the next

page. You will also see a diagram detailing the camera order in which the images will appear on the

screen.

The camera connectors support a BNC connection. Your camera cables will need to have a BNC adapter

on the unit end. Install your cameras by twisting the BNC connectors clockwise onto the unit’s camera

connectors.

Note that if you do not plug in at least two cameras you will see a white screen. This is an Auto

Gain Control that is adjusted by the chip on the Remote Eyes video capture card. You can correct

this by either adding another camera or turning off the other cameras using the Remote Eyes

camera Control Bar (see page 43 of the User Manual for how to turn off a camera using the Control

Bar).

Once you have installed your cameras and have power to the unit, locate the front panel key inside the

box. Using the key, open the front panel and press the toggle switch to turn on the system.

Page 1 of 4

Odyssey Technologies, Inc.

7526 Connelley Dr., Suite A, Hanover, MD 21076

Phone: 301-291-6000 Fax: 301-291-6001

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Odyssey Technologies, Inc

Remote Eyes® Setup Instructions Congratulations on purchasing your new Remote Eyes® Digital Video Recorder. This document will assist you in sett

Seite 2 - Page 2 of 4

The system runs on a Microsoft Windows® 2000 Operating System, which will automatically initialize once the unit is turned on. After Windows 2000 h

Seite 3 - Rear View of RES04 or RES08

Rear View of miniRES Server Rear View of RES04 or RES08 Page 3 of 4 Odyssey Technologies, Inc. 7526 Connelley Dr., Suite A, Hanover, MD 21076

Seite 4

Rear View of RES12 or RES16 Camera Order Guide for All RES/REM 4&8 and RES12 Standard Remote Eyes Capture Card Order Card Positions HPO Remo

Kommentare zu diesen Handbüchern

Keine Kommentare

Odyssey-electronics DVR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Auto DVR Odyssey-electronics DVR herunter. Odyssey Electronics DVR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern